| |
|
 |
|
DS-11001
Tie Rod (Cold
Rolled) |
|
Available in
Breaking load of
200 KN, 165 KN, 135
KN, 110 KN.
Diameter is 15/17mm
and the length is
available from 1 mtr.
to 6 mtr.
|
|
|
| |
|
 |
|
DS-11002
Wing Nut (Casted) |
|
Malleable Casting
as per BS32-12 Standard Safe working load of
90 KN.
Threading is suitable for
15/17mm tie rod. |
|
|
| |
|
 |
|
DS-11003
Wing Nut (Forged)
Heavy Duty |
|
Drop Forged from
Low Carbon Steel.
Safe Working Load of 90 KN.
Threading is suitable for
15/17mm tie rod.
|
|
|
| |
|
 |
|
DS-11004
Wing Nut (Forged)
Light Duty |
|
Drop Forged from
Low Carbon Steel.
Safe Working Load of 90 KN.
Threading is suitable for
15/17mm tie rod.
|
|
|
| |
| |
| |
|
 |
|
DS-11005
Anchor Nut Round
Type |
|
Made from SG Iron
Casting.
Safe working load of 90 KN.
Threading is suitable for 15/17mm tie rod.
This is 2lug type Nut with Base Diameter of
100mm.
|
|
|
| |
|
 |
|
DS-11006
Anchor Nut Flat Type |
|
Made from SG Iron
Casting.
Safe working load of
90 KN.
Threading is
suitable for 15/17mm
tie rod.
This is 2lug type
Nut with Base
Diameter of 100mm. |
|
|
| |
|
 |
|
DS-11007
Anchor Nut Forged
Flat Type |
|
Drop Forged from
Low Carbon Steel.
Safe Working Load of 90 KN
Threading is suitable for 15/17mm tie rod.
This is 3lug type Nut with Base Diameter of
100mm.
|
|
|
| |
|
 |
|
DS-11008
Wieldable Anchor Nut |
|
Drop Forged from
Low Carbon Steel.
Safe Working Load of 90 KN.
Threading is suitable for
15/17mm tie rod.
|
|
|
| |
|
|
|
| |
|
|
|
| |
|
 |
|
DS-11009
Anchor Plate with
Nut |
|
Made from SG Iron
Casting both the Plate and the Nut and joint
with a Circlip.
Safe Working load of 90 KN.
Threading is suitable for 15/17mm tie rod.
|
|
|
| |
|
 |
|
DS-11010
Tie Rod Connector |
|
Made from Low
Carbon Steel.
The Safe Working Load is 90 KN.
Threading is suitable for 15/17mm tie rod.
Available in the Lengths of 50mm, 100mm and
110mm. |
|
|
| |
|
 |
|
DS-11011
Water Stopper |
|
Made from
Malleable Casting and
has a safe working load of 90 KN.
Threading is suitable for 15/17mm tie rod.
Available with 2 pcs. of plastic adoptors.
|
|
|
| |
|
 |
|
DS-11012
Water Barrier |
|
Made from
Malleable Casting and
has a safe working load of 90 KN.
Threading is suitable for 15/17mm tie rod.
|
|
|
| |
|
|
|
| |
|
 |
|
DS-11013
Washer Plate |
|
Made from Low
Carbon Steel.
The Safe Working Load is 90 KN.
120mm X 120mm X T(mm) where T = 5, 6, 7, 8,
10, 12.
|
|
|
| |
|
 |
|
DS-11014
Rapid Clamp |
|
Body is made of
Malleable Casting and the Pin is made from
Forged Steel.
The Teeths on the Wedge is Heat Treated for
Maximum Life.
Used for Deformed Bars of 6mm - 10mm. |
|
|
| |
|
 |
|
DS-11015
Rapid Clamp
Tensioner |
|
Body is made from
SG Iron Casting and the Threaded Rod is
Forged Steel.
Used for Deformed Bars of 6mm - 10mm
|
|
|
| |
|
 |
|
DS-11016
Spring Clamp |
|
Body is made from
SG Iron Casting and the Threaded Rod is
Forged Steel.
Used for Deformed Bars of 6mm - 10mm
|
|
|
| |
|
|
|
| |
|
 |
|
DS-11017
Steel Cone |
|
Made from Low
Carbon Steel.
The Safe Working Load is 90 KN.
Threading is suitable for 15/17mm tie rod.
The available lengths is 75mm and 100mm. |
|
|
| |
|
 |
|
DS-11018
PVC Type Steel Cone |
|
Made from Low
Carbon Steel with PVC Cove.
The Safe Working Load is 90 KN.
Threading is suitable for 15/17mm tie rod.
The available length of 100mm. |
|
|
| |
|
 |
|
DS-11019
Shuttering Clamps |
|
Made from Low
Carbon Steel.
The Safe Working Load is 90 KN.
Available in the following sizes:
Width from 25mm to 32mm, Thickness from
4.5mm to 8mm and Length of the Clamp from
600mm to 1200mm |
|
|
| |
|
 |
|
DS-11020
Concrete Clamps |
|
Made from Low
Carbon Steel.
The Safe Working Load is 90 KN.
Available in lengths of 600, 800, 1000,1200,
1400 and 1700mm
|
|
|
| |
|
|
|
| |
|
|
|
| |
|
 |
|
DS-11021
Universal Clamp |
|
Made from Low
Carbon Steel with
a Carriage Bolt, Nut and Washer.
The carriage bolt is M12 X 120mm |
|
|
| |
|
 |
|
DS-11022
Timber Walling Clamp |
|
Made from Low
Carbon Steel with
a L-Bolt, Nut and Washer
The L bolt is M16 X (5 inch + 6 inch |
|
|
|
|
| |
|
|
|
| |
|
|
|
| |
|
|
|
| |
|
|
| |
|
|
|
| |
|
|
|
