DS-11213
Kwik Stage System

Ledger

Sizes : 1.2 mtr., 1.8 mtr., 2.4 mtr.

DS-11214
Gogo Clamp

DS-11215
Single Clamp

DS-11216
Pannel Wedge

DS-11217
Wedge & Clip

DS-11218
Universal Jack

The Universal Jack provide 500mm fine & coarse adjustment at the top or bottom of a scaffold structure. It is used in Conjunction with Socket bases, U-Head and Drop head adaptor. It is manufacture in 38mm OD tube, 4mm wall thickness.

Size : 660mm Long (500mm adjustment)
Cross : Hollow 38mm OD, Solid 36OD





 

DS-11219
Adjustable U Head

The Adjustment 'U'-Head Jack is a upper component, which provides full 500mm of fine & coarse adjustment. This 'U'-Head jack is can be used with traditional timber, H20 Timber Beam, Support. 'U'-Head are designed to use with single or double nominal Timber and H20 Timber Beams. This 'U'-Head is welded with Universal jack to provide a 500mm fine & coarse adjustment.

Size : U-Head 90x150x150mm+660mm Long Jack
U-Head 180x150x150mm+660mm Long Jack

DS-11220
Swivel Jack

Made from Pipe joint with the plate with a fasteners so that we
can move the pipe in 180 degrees.

Made from pipe of
38mm X 4mm X 650mm Height








 

DS-11221
Adjustable Base Jack

The Adjustable base Jack is a base component, which provides full 500mm of line & coarse adjustment. The base jack is have 5mm thick bearing plate welded to the end of universal jack. 40kn is a Safe working load on 500mm adjustment.

Size : 660mm long, Base 120x120x5mm
Cross Section : Hollow 38mm OD, Solid 36mm OD